User anlegen / Passwort ändern

Management User „Admins“

Lokalen Adminsitrator User anlegen:

(Cisco Controller) config> mgmtuser add username password ?


read-write Creates a management user with read-write access.
read-only Creates a management user with read-only access.
lobby-admin Creates a management user with lobby ambassador privileges.

Passwort eines bestehenden Users ändern:

(Cisco Controller) config>mgmtuser password username ? 

<password> Enter password up to 24 alphanumeric characters.

(Cisco Controller) config>mgmtuser password username password

User löschen

(Cisco Controller) config>mgmtuser delete ?
               
<username>     Enter name up to 24 alphanumeric characters.
               
(Cisco Controller) config>mgmtuser delete username

 

Network User „Clients“

(Cisco Controller) config>netuser ?

add Creates a local network user.
delete Delete an existing network user.
description Sets the description for a network user.
guest-lan-id Configures a Wired guest LAN Id for a network user.
guest-role Configures a Role for Guest User.
lifetime Configures the lifetime for a Guest Network User. Valid range is 60 to 31536000 seconds.
maxUserLogin Configures the maximum number of login sessions allowed for a network user
password Configures a password for a network user.
wlan-id Configures a Wireless LAN Id for a network user.


tbc…

 

admin

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

Diese Website verwendet Akismet, um Spam zu reduzieren. Erfahre mehr darüber, wie deine Kommentardaten verarbeitet werden.